Tag: mario day

DIY Crochet – Super Mario Super Star

Welcome back friends! Do you crochet? I do! I feel calm and cozy when I’m crocheting, and fiercely proud whenever I complete a project.

March 10th was Mario Day! In celebration I created this super soft and cuddly Super Star pillow! This pattern is intermediate and ideal for those who know their way around “magic rings”, “increases” and “decreases”. Any chenille-style yarn, size 6, can be used in this pattern, but for my example piece I used Bernat Baby Blanket Yarn in buttercup yellow.

Let’s get started!

SUPPLIES
  • Crochet hook (size 10 mm)
  • Chenille-style yarn (size 6)
  • Scissors
  • Yarn needle or small crochet hook
  • Fiber fill
  • Black felt
  • White felt
  • Black thread
  • Sewing needle
SuperStarEyePatternDownload
INSTRUCTIONS
  1. Round 1: Create a magic ring with 8 single crochets (total of 8 stitches). Place a stitch marker in the last stitch of this round.
  2. Round 2: Increase in each stitch around (total of 16 stitches). Place a stitch marker in the last stitch of this round (henceforth remove it and move it up to the last stitch in each round after this one).
  3. Round 3: 1 single crochet, 1 increase, alternating around the round (24).
  4. Round 4: 1 single crochet, 1 increase, 1 single crochet, alternating around the round (32).
  5. Round 5: 3 single crochet, 1 increase, alternating around the round (40).
  6. Round 6: 2 single crochet, 1 increase, 2 single crochet, alternating around the round (48).
  7. Round 7: 5 single crochet, 1 increase, alternating around the round (56).
  8. Round 8: 3 single crochet, 1 increase, 3 single crochet, alternating around the round (64).
  9. Round 9: 7 single crochet, 1 increase, alternating around the round (72).
  10. Round 10: 4 single crochet, 1 increase, 4 single crochet, alternating around the round (80).
  11. Finish off the first center piece of the star by slip stitching into the next stitch, then cutting the yarn pulling the end through. Using a yarn needle, stitch the loose end of the yarn into the body of the center piece and set it aside.
  12. Repeat steps 1 through 10 to create a second center piece of the star. This time, do not slip stitch, leave the yarn attached and move the stitch marker to the last stitch.
  13. On this second center piece that we have not tied off, count 16 stitches from the marker on your last stitch from the round before and put a stitch marker through the 16th stitch. Count 16 stitches from this marker and place another marker through that stitch. Continue this around your center piece until you have 5 markers total.
  14. Place the marked centerpiece over the tied-off centerpiece with the more textured sides both facing out, then re-pin the five markers through the aligned stitches of both centerpieces.
  15. Point Round 1: 16 single crochet down one side of the pinned centerpieces from marker to marker with the 16th stitch bringing both sides together just inside the next marker. Then turn your work and do 16 single crochet up the other centerpiece side to reach your starting point (32). Place a stitch maker in the last stitch of this round, which also joins both sides together.
  16. Point Round 2: Single crochet in each stitch around (32). Place a stitch marker in the last stitch of this round (henceforth remove it and move it up to the last stitch in each round after this one).
  17. Point Round 3: 14 single crochet, 1 decline, turn the project around and then 14 single crochet and 1 decline (30).
  18. Point Round 4: 4 single crochet, 1 decline, 4 single crochet, alternating around the point round (27).
  19. Point Round 5: 7 single crochet, 1 decline, alternating around the point round (24).
  20. Point Round 6: 3 single crochet, 1 decline, 3 single crochet, alternating around the point round (21).
  21. Point Round 7: 5 single crochet, 1 decline, alternating around the point round (18).
  22. Point Round 8: 2 single crochet, 1 decline, 2 single crochet, alternating around the point round (15).
  23. Point Round 9: 3 single crochet, 1 decline, alternating around the point round (12).
  24. Point Round 10: 1 single crochet, 1 decline, 1 single crochet, alternating around the point round (9).
  25. Point Round 11: 1 single crochet, 1 decline, alternating around the point round (6).
  26. Point Round 12: Decline 3 times (3).
  27. Cut off your yarn with a little bit of a tail. Attach a yarn needle and insert your needle through the top 3 stitches of the point and pull them tight to make a sharper point. Then stitch the rest of the tail into the body.
  28. To begin a new point with loose yarn, insert your hook into the first stitch, yarn over with your loose yarn and pull through, then complete the stitch by yarning over and pulling through this loop. This will anchor your loose yarn to the next point and mark the first stitch.
  29. Repeat steps 15 through 27 to create the next point. If you’re feeling lost, remember to always count your stitches. At the end of each round the amount of stitches should match the number I’ve put into parenthesis for that round.
  30. Continue repeating steps 15 through 27 until you have completed 4 points of the star, then stuff what you’ve completed. Do not worry about the holes at the base of each point, we will sew them up once we’ve completed the final point.
  31. Begin the last point and stuff it a little at a time as you stitch upwards. Finish the stuffing with chopstick and tie off.
  32. Once the star has been stuffed and completed with 5 points, use the same yarn and a yarn needle to sew up any holes, found at the base in between each point. Concealing any excess yarn by stitching it into the body of the star.
  33. Once the star has been completed. Cut out the pieces for the felt eyes using the patterns I’ve provided, and the black and white felt.
  34. Stitch the white highlights onto the black backgrounds, then stitch the eyes onto the pillow.
  35. Enjoy!

DIY Fuse Bead – Super Mario World Magnets

Welcome back friends! We bought a new refrigerator some time ago and I’ve been thinking it would be nice to decorate it with some Super Mario Bros. magnets! Also, March 10th is Mario Day!

Working with a limited amount of black and white perler beads, I chose a handful of characters / objects from Super Mario World to begin with, and more to come! I created (and the pictures of the patterns are included below) for small Mario, small Luigi, a coin, Yoshi’s egg and Yoshi.

The magnets turned out great! I left them a little less melted on outward facing side because I like the look, but you are always welcome to melt them more! Be careful with the iron, but don’t be afraid to make some mistakes! Mistakes happen for everyone, you may see two pieces of my Mario’s mustache that were over-melted from an unevenly heated iron, but if it’s not worth scrapping the whole piece, embrace it!

Let’s get started!

SUPPLIES
  • Fuse beads
  • Fuse bead pegboard
  • Parchment paper
  • Point tweezers (optional)
  • Painter’s tape
  • Seam ripper
  • Iron
  • Iron-safe surface
  • Peel and stick magnet discs
INSTRUCTIONS
  1. If your beads did not come pre-sorted by color, sort them into the colors you need per character and/or object.
    • Coin: 50 black, 25 white, 17 light brown, 27 bright yellow, 41 gold yellow.
    • Luigi: 63 black, 29 white, 19 bright green, 39 light brown, 18 dark brown, 5 lighter blue, 17 blue, 12 darker blue, 20 lighter tan, 17 golden tan, 2 bright yellow.
    • Mario: 63 black, 29 white, 19 bright red, 39 light brown, 18 dark brown, 5 lighter blue, 17 blue, 12 darker blue, 20 lighter tan, 17 golden tan, 2 bright yellow.
    • Yoshi’s egg: 40 black, 70 white, 19 darker green, 29 lighter green, 8 bright green.
    • Yoshi: 146 black, 63 white, 23 gold yellow, 20 bright red, 34 darker green, 54 bright green.
  2. On your pegboard, begin laying out the appropriate colored beads for the character(s) and/or object(s) you’ve chosen. I recommend working on one character/object at a time, then moving on to the next.
  3. If you are having a hard time placing beads into specific places, use pointed tweezers to pick up each bead and then insert it.
  4. Once each character has been completed, take strips of painter’s tape and cover that character, slightly layering each piece of tape so it’s one connected piece.
  5. Take a seam ripper (or other sharp pointed tool) and poke a small hole into the center of each fuse bead in the pattern. This allows built up heat to escape the tape when ironing.
  6. Carefully remove the taped pattern from the peg board and place it tape-side down on an iron-safe surface. Then place parchment, wax, or ironing paper over it.
  7. Heat a dry iron to a medium heat and as smoothly and evenly as you can, begin to iron the project in a circular motion. Do not press down. Beads take about 10 to 20 seconds per side to fuse evenly and some colors may fuse more quickly than others.
  8. When the beads begin to fuse together you’ll see their colors more clearly through the paper and the center holes will shrink to a pinhole size. Lift the paper occasionally to see how the beads are fusing.
  9. Let the design cool, placing a flat and heavy object over it to keep it from curling.
  10. Remove the weight and paper and flip the project over. Peel off the tape and place the paper back on this side of the project.
  11. Repeat step 7 through 9 on this side of the project. I chose to only lightly fuse the beads on this side because I prefer the look, but you are welcome to melt them more!
  12. Remove the weight and paper and flip the project over. 
  13. Peel the back-liner off a magnet and attach it to the back of your project. For the smaller objects like the coin and egg, I used one magnet. For Mario and Luigi I used two, spread evenly. And for Yoshi, I used three magnets, spread evenly!
  14. Stick to you refrigerator or other magnetic surface and enjoy!