hobby – Whole Heartily

DIY Crochet – Bee Plush

Welcome back friends! Do you crochet? I do! I feel calm and cozy when I’m crocheting, and fiercely proud whenever I complete a project.

I’ve seen some adorable bee plushies in the animated shows my daughter watches, and I wanted to create one for her!

This bee is soft and cuddly! The pattern is easy, and ideal for any level of crocheter (beginners included)! Any size 6 chenille-style yarn can be used in this pattern, but I used Bernat Baby in buttercup yellow and lapis blue, and for the white of the wings. You can use whatever color combination you prefer!

Let’s get started!

SUPPLIES

Crochet hook (size 6.50 mm)
Chenille-style yarn (size 6)
Scissors
Yarn needle or small crochet hook
Fiber fill

INSTRUCTIONS

Round 1: With the yellow yarn, create a magic ring with 6 single crochets (total of 6 stitches). Place a stitch marker in the last stitch of this round.
Round 2: Increase in each stitch around (total of 12 stitches). Place a stitch marker in the last stitch of this round (henceforth remove it and move it up to the last stitch in each round after this one).
Round 3: 1 single crochet, 1 increase, alternating around the round (18).
Round 4: 2 single crochet, 1 increase, alternating around the round (24).
Round 5: Single crochet in each stitch around (24).
Round 6: Switch colors to blue (or whatever color you choose for the bee’s stripes), then single crochet in each stitch around (24).
- To switch colors insert your hook into the first stitch, yarn over and pull through so there are two loops of yellow on your hook. Hook onto the blue and pull in through the two loops of yellow to create the first stitch of Round 6 (for extra security, bring the two loose ends together inside the project and double knot).
Round 7: Single crochet in each stitch around (24).
Round 8: Switch colors back to yellow then single crochet in each stitch around (24).
Round 9: Single crochet in each stitch around (24).
Round 10: Switch colors back to blue then single crochet in each stitch around (24).
Round 11: Single crochet in each stitch around (24).
Set the main body aside for now and begin the wings.
Wings Round 1: With the white yarn, create a magic ring with 6 single crochets (total of 6 stitches). Place a stitch marker in the last stitch of this round.
Wings Round 2: Increase in each stitch around (total of 12 stitches). Place a stitch marker in the last stitch of this round.
Cut the yarn about 8 to 10 inches from your hook and pull the loose end through the last stitch, then set it aside.
Repeat steps 13 through 15 to create a second wing.
Thread your yarn needle with the loose end of one wing, position it where you would like (somewhere on the band of yellow between the two black stripes), and insert your needle through one of the stitches. Pull through until the wing stops at the body of the bee. Position wing and stitch through the bottom of the wing where it comes into contact with the body of the bee. Repeat this stitching process along the bottom of the wing.
- If there is a tail from creating the magic ring, conceal it by stitching it into the wing and/or into the body of the bee.
Repeat for the second wing.
Attach the safety eyes.
Body Round 12: Switch colors back to yellow, then 2 single crochet, 1 decrease, alternating around the round (18).
Body Round 13: 1 single crochet, 1 decrease, alternating around the round (12).
Begin stuffing the bee to your preference.
Body Round 14: 6 decreases around (6).
Cut the yarn off 8 to 10 inches from the project and pull it through the last stitch.
Stuff the bee a little more if necessary.
Thread the needle and insert the needle through each stitch, then pull tight.
Knot and sew the remaining tail of yarn into the yellow stitches around.
Enjoy!

DIY Crochet – Super Mario Super Star

Welcome back friends! Do you crochet? I do! I feel calm and cozy when I’m crocheting, and fiercely proud whenever I complete a project.

March 10th was Mario Day! In celebration I created this super soft and cuddly Super Star pillow! This pattern is intermediate and ideal for those who know their way around “magic rings”, “increases” and “decreases”. Any chenille-style yarn, size 6, can be used in this pattern, but for my example piece I used Bernat Baby Blanket Yarn in buttercup yellow.

Let’s get started!

SUPPLIES

Crochet hook (size 10 mm)
Chenille-style yarn (size 6)
Scissors
Yarn needle or small crochet hook
Fiber fill
Black felt
White felt
Black thread
Sewing needle

SuperStarEyePattern Download

INSTRUCTIONS

Round 1: Create a magic ring with 8 single crochets (total of 8 stitches). Place a stitch marker in the last stitch of this round.
Round 2: Increase in each stitch around (total of 16 stitches). Place a stitch marker in the last stitch of this round (henceforth remove it and move it up to the last stitch in each round after this one).
Round 3: 1 single crochet, 1 increase, alternating around the round (24).
Round 4: 1 single crochet, 1 increase, 1 single crochet, alternating around the round (32).
Round 5: 3 single crochet, 1 increase, alternating around the round (40).
Round 6: 2 single crochet, 1 increase, 2 single crochet, alternating around the round (48).
Round 7: 5 single crochet, 1 increase, alternating around the round (56).
Round 8: 3 single crochet, 1 increase, 3 single crochet, alternating around the round (64).
Round 9: 7 single crochet, 1 increase, alternating around the round (72).
Round 10: 4 single crochet, 1 increase, 4 single crochet, alternating around the round (80).
Finish off the first center piece of the star by slip stitching into the next stitch, then cutting the yarn pulling the end through. Using a yarn needle, stitch the loose end of the yarn into the body of the center piece and set it aside.
Repeat steps 1 through 10 to create a second center piece of the star. This time, do not slip stitch, leave the yarn attached and move the stitch marker to the last stitch.
On this second center piece that we have not tied off, count 16 stitches from the marker on your last stitch from the round before and put a stitch marker through the 16th stitch. Count 16 stitches from this marker and place another marker through that stitch. Continue this around your center piece until you have 5 markers total.
Place the marked centerpiece over the tied-off centerpiece with the more textured sides both facing out, then re-pin the five markers through the aligned stitches of both centerpieces.
Point Round 1: 16 single crochet down one side of the pinned centerpieces from marker to marker with the 16th stitch bringing both sides together just inside the next marker. Then turn your work and do 16 single crochet up the other centerpiece side to reach your starting point (32). Place a stitch maker in the last stitch of this round, which also joins both sides together.
Point Round 2: Single crochet in each stitch around (32). Place a stitch marker in the last stitch of this round (henceforth remove it and move it up to the last stitch in each round after this one).
Point Round 3: 14 single crochet, 1 decline, turn the project around and then 14 single crochet and 1 decline (30).
Point Round 4: 4 single crochet, 1 decline, 4 single crochet, alternating around the point round (27).
Point Round 5: 7 single crochet, 1 decline, alternating around the point round (24).
Point Round 6: 3 single crochet, 1 decline, 3 single crochet, alternating around the point round (21).
Point Round 7: 5 single crochet, 1 decline, alternating around the point round (18).
Point Round 8: 2 single crochet, 1 decline, 2 single crochet, alternating around the point round (15).
Point Round 9: 3 single crochet, 1 decline, alternating around the point round (12).
Point Round 10: 1 single crochet, 1 decline, 1 single crochet, alternating around the point round (9).
Point Round 11: 1 single crochet, 1 decline, alternating around the point round (6).
Point Round 12: Decline 3 times (3).
Cut off your yarn with a little bit of a tail. Attach a yarn needle and insert your needle through the top 3 stitches of the point and pull them tight to make a sharper point. Then stitch the rest of the tail into the body.
To begin a new point with loose yarn, insert your hook into the first stitch, yarn over with your loose yarn and pull through, then complete the stitch by yarning over and pulling through this loop. This will anchor your loose yarn to the next point and mark the first stitch.
Repeat steps 15 through 27 to create the next point. If you’re feeling lost, remember to always count your stitches. At the end of each round the amount of stitches should match the number I’ve put into parenthesis for that round.
Continue repeating steps 15 through 27 until you have completed 4 points of the star, then stuff what you’ve completed. Do not worry about the holes at the base of each point, we will sew them up once we’ve completed the final point.
Begin the last point and stuff it a little at a time as you stitch upwards. Finish the stuffing with chopstick and tie off.
Once the star has been stuffed and completed with 5 points, use the same yarn and a yarn needle to sew up any holes, found at the base in between each point. Concealing any excess yarn by stitching it into the body of the star.
Once the star has been completed. Cut out the pieces for the felt eyes using the patterns I’ve provided, and the black and white felt.
Stitch the white highlights onto the black backgrounds, then stitch the eyes onto the pillow.
Enjoy!

DIY Fuse Bead – Super Mario World Magnets

Welcome back friends! We bought a new refrigerator some time ago and I’ve been thinking it would be nice to decorate it with some Super Mario Bros. magnets! Also, March 10th is Mario Day!

Working with a limited amount of black and white perler beads, I chose a handful of characters / objects from Super Mario World to begin with, and more to come! I created (and the pictures of the patterns are included below) for small Mario, small Luigi, a coin, Yoshi’s egg and Yoshi.

The magnets turned out great! I left them a little less melted on outward facing side because I like the look, but you are always welcome to melt them more! Be careful with the iron, but don’t be afraid to make some mistakes! Mistakes happen for everyone, you may see two pieces of my Mario’s mustache that were over-melted from an unevenly heated iron, but if it’s not worth scrapping the whole piece, embrace it!

Let’s get started!

SUPPLIES

Fuse beads
Fuse bead pegboard
Parchment paper
Point tweezers (optional)
Painter’s tape
Seam ripper
Iron
Iron-safe surface
Peel and stick magnet discs

INSTRUCTIONS

If your beads did not come pre-sorted by color, sort them into the colors you need per character and/or object.
- Coin: 50 black, 25 white, 17 light brown, 27 bright yellow, 41 gold yellow.
- Luigi: 63 black, 29 white, 19 bright green, 39 light brown, 18 dark brown, 5 lighter blue, 17 blue, 12 darker blue, 20 lighter tan, 17 golden tan, 2 bright yellow.
- Mario: 63 black, 29 white, 19 bright red, 39 light brown, 18 dark brown, 5 lighter blue, 17 blue, 12 darker blue, 20 lighter tan, 17 golden tan, 2 bright yellow.
- Yoshi’s egg: 40 black, 70 white, 19 darker green, 29 lighter green, 8 bright green.
- Yoshi: 146 black, 63 white, 23 gold yellow, 20 bright red, 34 darker green, 54 bright green.
On your pegboard, begin laying out the appropriate colored beads for the character(s) and/or object(s) you’ve chosen. I recommend working on one character/object at a time, then moving on to the next.
If you are having a hard time placing beads into specific places, use pointed tweezers to pick up each bead and then insert it.
Once each character has been completed, take strips of painter’s tape and cover that character, slightly layering each piece of tape so it’s one connected piece.
Take a seam ripper (or other sharp pointed tool) and poke a small hole into the center of each fuse bead in the pattern. This allows built up heat to escape the tape when ironing.
Carefully remove the taped pattern from the peg board and place it tape-side down on an iron-safe surface. Then place parchment, wax, or ironing paper over it.
Heat a dry iron to a medium heat and as smoothly and evenly as you can, begin to iron the project in a circular motion. Do not press down. Beads take about 10 to 20 seconds per side to fuse evenly and some colors may fuse more quickly than others.
When the beads begin to fuse together you’ll see their colors more clearly through the paper and the center holes will shrink to a pinhole size. Lift the paper occasionally to see how the beads are fusing.
Let the design cool, placing a flat and heavy object over it to keep it from curling.
Remove the weight and paper and flip the project over. Peel off the tape and place the paper back on this side of the project.
Repeat step 7 through 9 on this side of the project. I chose to only lightly fuse the beads on this side because I prefer the look, but you are welcome to melt them more!
Remove the weight and paper and flip the project over.
Peel the back-liner off a magnet and attach it to the back of your project. For the smaller objects like the coin and egg, I used one magnet. For Mario and Luigi I used two, spread evenly. And for Yoshi, I used three magnets, spread evenly!
Stick to you refrigerator or other magnetic surface and enjoy!

DIY Crochet – Cat Ear Beanie Hat

Welcome back friends! Do you crochet? I dabbled in crochet off and on for a few years, always fascinated, but never fully catching on. I kept at it, and suddenly, it clicked! I feel calm and cozy when I’m crocheting, and fiercely proud whenever I complete a project.

It’s that time of year for keeping warm! And, in the spirit of playing the Pete the Cat and the Missing Cupcakes game, I thought I’d make a blue crochet cat ear hat!

This hat is whimsical and cozy! The pattern is easy, and ideal for any level of crocheter (beginners included)! Any size 4 yarn can be used in this pattern, but for the Pete the Cat blue of my example piece, I used Red Heart yarn in the “soft navy” color. The size of the hat can also be adjusted for smaller heads by reducing the amount of rows to match half the circumference of the intended person’s head.

Let’s get started!

SUPPLIES

Crochet hook (size 5.50 mm)
Red Heart yarn (color: soft navy)
Scissors
Yarn needle or small crochet hook

INSTRUCTIONS

Create a slip knot and then at least 60 chain stitches (you can chain a few more if you want to make the brim wider). I wanted a wider brim/slouchier hat so I chained 70.
Turn your chain around and half double crochet (hdc) into the third stitch from the hook, then continue to hdc all the way across your chain.
Chain 2 and turn your work. Hdc into the back loop of the third stitch from the hook, then continue to hdc in the back loops of each stitch all the way across your project.
Repeat step 3 until there is a total of 28 to 30 hdc rows (the amount of rows can be adjusted so that the width of the project matches half of the circumference of your head).
After the last hdc of your last row, fold the length of the project in half (the fold will be the top of your hat where the “ears” form).
Using the yarn that is still attached, stitch up this side of the hat towards the fold. Insert your hook through the aligned stitches on either side and perform a single crochet to bring them together.
Once you’ve reached the top corner of the fold, tie a knot and cut the yarn. Use a yarn needle or a small crochet hook to weave the remaining yarn into the project.
Knot the tail from the beginning of the project to your yarn skein and repeat steps 6 and 7 up the other side of the hat.
Fold up the brim, place the hat on your head and adjust the ears to your preference!
Enjoy!

DIY Crochet – Warm, Fuzzy Scarf Pattern

It’s that time of year for keeping warm! Whether you’d like to create a scarf for yourself or to gift to a friend, I’m here to help!

This scarf is cozy classic and ideal for any level of crocheter (beginners included)! Any bulky size 5 yarn can be used in this pattern, but for the soft and fuzzy results of my example piece, I used Carron Latte Cakes Yarn.

SUPPLIES

Crochet hook (size 6mm)
Carron Latte Cakes Yarn (Color: Rose Scented)
Scissors
Yarn needle or small crochet hook

INSTRUCTIONS

Create a slip knot, then chain 250 stitches.
Turn your chain around and half double crochet (hdc) into the third stitch from the hook. Continue to hdc in each stitch all the way across your chain.
Chain 2 and turn your work. Hdc into the back loop of the third stitch from the hook, then continue to hdc in the back loops of each stitch all the way across your project.
Repeat step 3 for the next thirteen rows for a total of 15 hdc rows. You are welcome increase the amount of rows if you’d prefer a wider scarf!
After the last hdc stitch of your last row, use the scissors to disconnect the yarn from the skein and pull the loose end through your crochet loop.
Using a yarn needle or a small crochet hook, weave the loose ends of the yarn into the surrounding scarf.
Wrap around your neck and get cozy!

DIY – Crochet Pumpkin with a Cinnamon Stick Stem

It’s that time of year for autumn decor! So let’s create a crochet pumpkin with a cinnamon stick stem!

SUPPLIES

Crochet hook (size 5.5mm)
Medium yarn (size 4)
Fiberfill stuffing
Scissors
Yarn needle

INSTRUCTIONS

Create a slip knot and then chain 31 stitches.
For this piece, we will be working in the back loop only for all stitches.
Starting in the 2nd chain from the hook, create 3 slip stitches, 6 single crochets, 12 half double crochets, 6 single crochets and 3 slip stitches. Then chain 1 and turn the project around.
Repeat step 3 until the project measures about 12 inches long across the center.
Join the two short sides of the project together, and insert the hook into the back loop of the working stitches and the starting chain as you stitch the final row.
Sew a running stitch along the bottom edges of the project and pull to gather. Then tie a knot, weave in some of the excess yarn, and cut off the rest.
Turn the pumpkin project over and stuff it with fiberfill until it’s as plump as you want it.
Sew a running stitch along the top of the pumpkin and pull to gather, leaving a hole large enough to insert a cinnamon stick. Then tie a knot, weave in some of the excess yarn and cuts off the rest.
Insert a cinnamon stick into the hole you left for it at the top of the pumpkin. You can hot glue it in place or leave it loose like I did so that I can replace the cinnamon stick if it looses its smell!
Place in your house an enjoy!

Travel Mug Cozy – Crochet Pattern

It’s that time of year for enjoying hot beverages! Let’s protect our hands from said beverages and add our own flair to the cups by crocheting our own cup cozy, or zarf!

SUPPLIES

Crochet hook (size 5.0mm)
Medium yarn (size 4)
Scissors
Yarn needle

INSTRUCTIONS

Create a slip knot and then chain 30 stitches.
Careful not to twist the chain, bring both ends together and slip stitch into the first chain stitch to join them into a circle.
Chain 1 stitch and then loosely slip stitch into the back bump of each of the 30 chain stitches, then join with a final slip stitch.
Chain 2, then turn the work around so you’ll be working around the outside of the circle. Double crochet in each of the 30 stitches around, then join with a slip stitch.
Chain 2 and front post double crochet in a stitch and then double crochet in the next stitch. Continue alternating around the circle, then join with a final slip stitch.
Chain 2 and double crochet in a stitch, then front post double crochet in the next stitch. Continue alternating around the circle, then join with a final slip stitch.
Repeat steps 5 and 6, four or five more times around and at the end of round 8 o 9, slip stitch to join.
Chain 1 and loosely slip stitch in each of the 30 stitches around, join and tie off the yarn.
Flip the cozy inside out and weave in the loose ends using your yarn needle.
Flip the cozy right side out and you’re done! Enjoy!

*This pattern will fit a Starbucks reusable travel cup. Before getting too far into this project, I recommend slipping the joined chain onto the cup you are making the cozy for. If it doesn’t fit well, adjust how many chain stitches there are up or down to fit.