Homemade Tinker Bell Smash Cake Recipe (No Added Sugar)

Disney Tinker Bell Smash Cake RecipeZoey, our little Tinker Bell, is one year old! This year has been an unusual one (understatement of the century), but it has flown by faster than I could have imagined and I have been fortunate enough to spend the majority of it at home with her; grateful for every moment.

Like many one year birthday boys and girls, Zoey has not been exposed to much sugar. Now I don’t mind a little sugar, but I did not want to sugar bomb her all at once so I created a homemade smash cake with frosting for her without adding extra sugar.

This Tinker Bell petal smash cake is a variation of a banana bread recipe my family has made for years without added sugar and a variation of cream cheese frosting without powdered sugar. I would consider the cake a tame banana flavor and the frosting a tangy cream cheese flavor, smoothed out with the addition of a natural sweetener (I used agave nectar). I purchased a used Disney Infinity Tinker Bell figurine off of Mercari, gave it a good cleaning, and used it as a cake topper with the obligatory “1” candle.

Disney Tinker Bell Smash Cake Recipe Disney Tinker Bell Smash Cake RecipeShe was very tentative about smashing  her smash cake, almost like she wasn’t sure if she was allowed to. Even with her audience coaxing her she only tasted a little bit of cake I broke off for her and mostly just played around in the frosting. Her favorite part of the cake was the Tinker Bell figurine up top and she ended up fixating on that. And what the hey, as long as she had fun!

So let’s make a smash cake for the little Tinker Bell in your life!

Disney Tinker Bell Smash Cake Recipe

  • 3 bananas, overripe
  • 1/2 cup of butter, softened
  • 2 eggs
  • 1 1/4 cup of flour
  • 3/4 teaspoon of baking soda
  • 1/2 teaspoon of salt
  1. Preheat the oven to 350F.
  2. Grease two 6-inch cake pans, or line them with parchment paper.
  3. Cream the butter and bananas together with a (hand) mixer.
  4. Add the eggs in one at a time, beating each in with the (hand) mixer.
  5. In a separate bowl, combine the flour, baking soda and salt.
  6. Add the dry ingredients to the wet ingredients a little at a time, mixing and scraping down the sides of the bowl in between each addition.
  7. Pour the mixed batter into the prepared cake pans about half to 3/4 of the way full.
  8. Bake for about 30 to 35 minutes until a toothpick inserted into the centers comes out clean. The timing may vary depending on your oven so keep an eye on them!
  9. Remove the cakes from the oven and allow them to cool in their pans for about 10 minutes, then remove them from the pans and allow them to cool completely on a wire rack.
  10. Mine were pretty flat. If yours do not turn out flat, cut the very tops off of the cakes to create flat tops for stacking and frosting.
  11. Frost your cake (see below).

Disney Tinker Bell Smash Cake Recipe

  • 5 tablespoons of butter, room temperature
  • 1 1/2 packs of cream cheese (8 ounce), room temperature
  • A pinch of salt
  • 2 to 3 tablespoons agave nectar, honey or maple syrup
  • 1 to 2 tablespoons whole milk
  • 2 teaspoons of vanilla extract
  • 1 to 2 tablespoons corn starch
  • Green food coloring

*You can make the frosting up to several days in advance and store it in the refrigerator. Bring it to room temperature before frosting.*

  1. Whip the butter and cream cheese together in a large bowl until well combined.
  2. Add the agave nectar (or sweetener of choice), milk, salt and vanilla extract. Whip again, scraping down the sides of the bowl as needed.
  3. Add 1 tablespoon of corn starch and whip until well incorporated. If at this point the consistency is right for you, you can move on to the next step. If not you can add cornstarch one teaspoon at a time until it reaches the desired thickness (careful not to exceed 2 tablespoons total).
  4. Divide the frosting four equal parts in separate bowls. Add green food coloring to each bowl of frosting, ranging from dark to light green. Put each shade of green frosting into a pastry bag.
  5. Pipe and smear frosting on the top of the first layer of cake and gently place the second layer on top of this.
  6. Begin the petals by piping a dollop of dark green frosting on the side of the cake at the base. Take a flat slender spatula or butter knife press gently into the dollop and smear it to the right. Pipe another dollop of dark green near the end of the smear and repeat all the way around the cake.
  7. Repeat this process with the next shade of green and repeat, but stop before you reach the lightest shade of green and the top of the cake.
  8. Pipe and smear a healthy dollop of the lightest green frosting onto the top of the cake and smooth it out with a flat spatula, then continue with the last layer of petals in the lightest shade of green around the top of the cake.
  9. Adorn your cake with decorations.
  10. Enjoy!

Disney Tinker Bell Smash Cake Recipe


DIY Tinker Bell Peg Doll

DIY Tinker Bell Peg DollDIY Tinker Bell Peg DollPart of the fun in raising Zoey is making things that delight her; I want to create lasting, meaningful toys for her that are made with love and will be loved! Wooden toys are classic and beautiful, when created and treated right, they can last a lifetime; so let’s make some!

It’s no secret that Cameron and I love Disney. Zoey’s middle name was inspired by one of my favorite Disney princesses, Belle, and that Belle in her name has also led to another Disney nickname, Tinker Bell. I cannot wait to create a whole set of peg dolls for her, but these two characters hold the most significance until she begins watching the classics on her own.

We’ve created a Peasant Belle Peg Doll, check her out!

This week I’ll be sharing the steps I took to create a Tinker Bell peg doll for Zoey.

DIY Tinker Bell Peg Doll

  • Blank peg doll (I used a “small angel” or “girl” shape/size)
  • Small, flat & fine tip paint brushes
  • Paint palette (or a tray for your paint)
  • Green non-toxic acrylic paint
  • Yellow non-toxic acrylic paint
  • Light brown non-toxic acrylic paint
  • Light blue non-toxic acrylic paint
  • Light pink non-toxic acrylic paint
  • White non-toxic acrylic paint
  • Black non-toxic acrylic paint
  • Non-toxic varnish (I used Duraclear Ultra Matte Varnish)
  1. With a pencil, lightly sketch Tinker Bell onto your blank peg doll.

    DIY Tinker Bell Peg DollDIY Tinker Bell Peg Doll

  2. Begin painting your peg doll with the base layers first. I started with the green of her dress, the white of her wings and the yellow of her hair. Allow this paint to dry before moving on to avoid smudging, then apply a few more layers of each until you’re happy with the colors and textures.

    DIY Tinker Bell Peg DollDIY Tinker Bell Peg Doll

  3. Paint the very bottom and edges of the peg doll green to signify her slippers.
  4. After the base layers have dried, paint a border of darker green on the edges of her dress. If you don’t have a darker shade of green, you can create some by adding a small amount of black paint to the original green and blending.
  5. Paint an accent of lighter green on the inner layer of the dark green border of her dress. If you don’t have a lighter shade of green, you can create some by adding a small amount of white paint to the original green and blending.
  6. The wings can stay matte white, or you can add a pearly white finish to give them a sheen. Once the wings have dried, border and accent them with light blue paint.
  7. Paint light brown accents on and around the hair.
  8. Once the hair has dried, paint a small light blue ribbon around Tinker Bell’s bun.
  9. Taking something small and round (I used the opposite end of one of my smaller paint brushes) dip it in black paint and dot the two eyes. Using the finest tipped paintbrush you can find, give her an eyelash or two on each eye.
  10. Once the eye paint has dried, add a highlight dot to each eye with a fine tipped paintbrush and white paint.
  11. Using the same method as the eyes, dip the opposite end of a slightly larger paintbrush into light pink paint and dot the blush under each eye.
  12. With a little white paint, give her a few sparkles of pixie dust on the hem of her dress or wherever else you feel it will look right!
  13. Allow for all paint to completely dry, then apply a varnish and allow it to dry. You can apply as many coats as you want for the finish you want, just allow them to dry in between applications and before handing her over to your child.
  14. Voilà! Tinker Bell is done and ready to be played with! Enjoy!

DIY Tinker Bell Peg Doll DIY Tinker Bell Peg Doll