Tag: cozy

DIY Fuse Bead – Super Mario World Magnets

Welcome back friends! We bought a new refrigerator some time ago and I’ve been thinking it would be nice to decorate it with some Super Mario Bros. magnets! Also, March 10th is Mario Day!

Working with a limited amount of black and white perler beads, I chose a handful of characters / objects from Super Mario World to begin with, and more to come! I created (and the pictures of the patterns are included below) for small Mario, small Luigi, a coin, Yoshi’s egg and Yoshi.

The magnets turned out great! I left them a little less melted on outward facing side because I like the look, but you are always welcome to melt them more! Be careful with the iron, but don’t be afraid to make some mistakes! Mistakes happen for everyone, you may see two pieces of my Mario’s mustache that were over-melted from an unevenly heated iron, but if it’s not worth scrapping the whole piece, embrace it!

Let’s get started!

SUPPLIES
  • Fuse beads
  • Fuse bead pegboard
  • Parchment paper
  • Point tweezers (optional)
  • Painter’s tape
  • Seam ripper
  • Iron
  • Iron-safe surface
  • Peel and stick magnet discs
INSTRUCTIONS
  1. If your beads did not come pre-sorted by color, sort them into the colors you need per character and/or object.
    • Coin: 50 black, 25 white, 17 light brown, 27 bright yellow, 41 gold yellow.
    • Luigi: 63 black, 29 white, 19 bright green, 39 light brown, 18 dark brown, 5 lighter blue, 17 blue, 12 darker blue, 20 lighter tan, 17 golden tan, 2 bright yellow.
    • Mario: 63 black, 29 white, 19 bright red, 39 light brown, 18 dark brown, 5 lighter blue, 17 blue, 12 darker blue, 20 lighter tan, 17 golden tan, 2 bright yellow.
    • Yoshi’s egg: 40 black, 70 white, 19 darker green, 29 lighter green, 8 bright green.
    • Yoshi: 146 black, 63 white, 23 gold yellow, 20 bright red, 34 darker green, 54 bright green.
  2. On your pegboard, begin laying out the appropriate colored beads for the character(s) and/or object(s) you’ve chosen. I recommend working on one character/object at a time, then moving on to the next.
  3. If you are having a hard time placing beads into specific places, use pointed tweezers to pick up each bead and then insert it.
  4. Once each character has been completed, take strips of painter’s tape and cover that character, slightly layering each piece of tape so it’s one connected piece.
  5. Take a seam ripper (or other sharp pointed tool) and poke a small hole into the center of each fuse bead in the pattern. This allows built up heat to escape the tape when ironing.
  6. Carefully remove the taped pattern from the peg board and place it tape-side down on an iron-safe surface. Then place parchment, wax, or ironing paper over it.
  7. Heat a dry iron to a medium heat and as smoothly and evenly as you can, begin to iron the project in a circular motion. Do not press down. Beads take about 10 to 20 seconds per side to fuse evenly and some colors may fuse more quickly than others.
  8. When the beads begin to fuse together you’ll see their colors more clearly through the paper and the center holes will shrink to a pinhole size. Lift the paper occasionally to see how the beads are fusing.
  9. Let the design cool, placing a flat and heavy object over it to keep it from curling.
  10. Remove the weight and paper and flip the project over. Peel off the tape and place the paper back on this side of the project.
  11. Repeat step 7 through 9 on this side of the project. I chose to only lightly fuse the beads on this side because I prefer the look, but you are welcome to melt them more!
  12. Remove the weight and paper and flip the project over. 
  13. Peel the back-liner off a magnet and attach it to the back of your project. For the smaller objects like the coin and egg, I used one magnet. For Mario and Luigi I used two, spread evenly. And for Yoshi, I used three magnets, spread evenly!
  14. Stick to you refrigerator or other magnetic surface and enjoy!

DIY Crochet – Cat Ear Beanie Hat

Welcome back friends! Do you crochet? I dabbled in crochet off and on for a few years, always fascinated, but never fully catching on. I kept at it, and suddenly, it clicked! I feel calm and cozy when I’m crocheting, and fiercely proud whenever I complete a project.

It’s that time of year for keeping warm! And, in the spirit of playing the Pete the Cat and the Missing Cupcakes game, I thought I’d make a blue crochet cat ear hat!

This hat is whimsical and cozy! The pattern is easy, and ideal for any level of crocheter (beginners included)! Any size 4 yarn can be used in this pattern, but for the Pete the Cat blue of my example piece, I used Red Heart yarn in the “soft navy” color. The size of the hat can also be adjusted for smaller heads by reducing the amount of rows to match half the circumference of the intended person’s head.

Let’s get started!

SUPPLIES
  • Crochet hook (size 5.50 mm)
  • Red Heart yarn (color: soft navy)
  • Scissors
  • Yarn needle or small crochet hook
INSTRUCTIONS
  1. Create a slip knot and then at least 60 chain stitches (you can chain a few more if you want to make the brim wider). I wanted a wider brim/slouchier hat so I chained 70.
  2. Turn your chain around and half double crochet (hdc) into the third stitch from the hook, then continue to hdc all the way across your chain.
  3. Chain 2 and turn your work. Hdc into the back loop of the third stitch from the hook, then continue to hdc in the back loops of each stitch all the way across your project.
  4. Repeat step 3 until there is a total of 28 to 30 hdc rows (the amount of rows can be adjusted so that the width of the project matches half of the circumference of your head).
  5. After the last hdc of your last row, fold the length of the project in half (the fold will be the top of your hat where the “ears” form).
  6. Using the yarn that is still attached, stitch up this side of the hat towards the fold. Insert your hook through the aligned stitches on either side and perform a single crochet to bring them together. 
  7. Once you’ve reached the top corner of the fold, tie a knot and cut the yarn. Use a yarn needle or a small crochet hook to weave the remaining yarn into the project.
  8. Knot the tail from the beginning of the project to your yarn skein and repeat steps 6 and 7 up the other side of the hat.
  9. Fold up the brim, place the hat on your head and adjust the ears to your preference!
  10. Enjoy!

DIY Crochet – Warm, Fuzzy Scarf Pattern

Welcome back friends! Do you crochet? I dabbled in crochet off and on for a few years, always fascinated, but never fully catching on. I kept at it, and suddenly, it clicked! I feel calm and cozy when I’m crocheting, and fiercely proud whenever I complete a project.

It’s that time of year for keeping warm! Whether you’d like to create a scarf for yourself or to gift to a friend, I’m here to help! 

This scarf is cozy classic and ideal for any level of crocheter (beginners included)! Any bulky size 5 yarn can be used in this pattern, but for the soft and fuzzy results of my example piece, I used Carron Latte Cakes Yarn.

SUPPLIES
  • Crochet hook (size 6mm)
  • Carron Latte Cakes Yarn (Color: Rose Scented)
  • Scissors
  • Yarn needle or small crochet hook
INSTRUCTIONS
  1. Create a slip knot, then chain 250 stitches.
  2. Turn your chain around and half double crochet (hdc) into the third stitch from the hook. Continue to hdc in each stitch all the way across your chain.
  3. Chain 2 and turn your work. Hdc into the back loop of the third stitch from the hook, then continue to hdc in the back loops of each stitch all the way across your project.
  4. Repeat step 3 for the next thirteen rows for a total of 15 hdc rows. You are welcome increase the amount of rows if you’d prefer a wider scarf!
  5. After the last hdc stitch of your last row, use the scissors to disconnect the yarn from the skein and pull the loose end through your crochet loop.
  6. Using a yarn needle or a small crochet hook, weave the loose ends of the yarn into the surrounding scarf.
  7. Wrap around your neck and get cozy!

The First 30 Minutes of LEGO Star Wars: The Skywalker Saga

Have you ever been undecided on what to play next? 

Should you buy that game? Should you install that game?

I’ve been there, and sometimes you just need to take a look at the graphics, hear the music, and learn a little about the plot to see if it resonates with you before taking the next step. I’m here to help! I am creating the first 30 to the first 60 minute videos of games; indie and mainstream, new and old!

This week let’s take a look at the first 30 minutes of LEGO Star Wars: The Skywalker Saga…

Do you want to play the rest? 

The First 30 Minutes of the LEGO Harry Potter Collection

Have you ever been undecided on what to play next? 

Should you buy that game? Should you install that game?

I’ve been there, and sometimes you just need to take a look at the graphics, hear the music, and learn a little about the plot to see if it resonates with you before taking the next step. I’m here to help! I am creating the first 30 to the first 60 minute videos of games; indie and mainstream, new and old!

This week let’s take a look at the first 30 minutes of the LEGO Harry Potter Collection…

Do you want to play the rest? 

The First 30 Minutes of Lake

Have you ever been undecided on what to play next? 

Should you buy that game? Should you install that game?

I’ve been there, and sometimes you just need to take a look at the graphics, hear the music, and learn a little about the plot to see if it resonates with you before taking the next step. I’m here to help! I am creating the first 30 to the first 60 minute videos of games; indie and mainstream, new and old!

This week let’s take a look at the first 30 minutes of Lake…

Do you want to play the rest? 

The First 30 Minutes of Paleo Pines

Have you ever been undecided on what to play next? 

Should you buy that game? Should you install that game?

I’ve been there, and sometimes you just need to take a look at the graphics, hear the music, and learn a little about the plot to see if it resonates with you before taking the next step. I’m here to help! I am creating the first 30 to the first 60 minute videos of games; indie and mainstream, new and old!

This week let’s take a look at the first 30 minutes of Paleo Pines…

Do you want to play the rest? 

The First 30 Minutes of Fall of Porcupine

Have you ever been undecided on what to play next? 

Should you buy that game? Should you install that game?

I’ve been there, and sometimes you just need to take a look at the graphics, hear the music, and learn a little about the plot to see if it resonates with you before taking the next step. I’m here to help! I am creating the first 30 to the first 60 minute videos of games; indie and mainstream, new and old!

This week let’s take a look at the first 30 minutes of Fall of Porcupine…

Do you want to play the rest? 

DIY – Crochet Pumpkin with a Cinnamon Stick Stem

Welcome back friends! Do you crochet? I dabbled in crochet off and on for a few years, always fascinated, but never fully catching on. I kept at it, and suddenly, it clicked! I feel calm and cozy when I’m crocheting, and fiercely proud whenever I complete a project.

It’s that time of year for autumn decor! So let’s create a crochet pumpkin with a cinnamon stick stem!

SUPPLIES
  • Crochet hook (size 5.5mm)
  • Medium yarn (size 4)
  • Fiberfill stuffing
  • Scissors
  • Yarn needle
INSTRUCTIONS
  1. Create a slip knot and then chain 31 stitches.
  2. For this piece, we will be working in the back loop only for all stitches.
  3. Starting in the 2nd chain from the hook, create 3 slip stitches, 6 single crochets, 12 half double crochets, 6 single crochets and 3 slip stitches. Then chain 1 and turn the project around.
  4. Repeat step 3 until the project measures about 12 inches long across the center.
  5. Join the two short sides of the project together, and insert the hook into the back loop of the working stitches and the starting chain as you stitch the final row.
  6. Sew a running stitch along the bottom edges of the project and pull to gather. Then tie a knot, weave in some of the excess yarn, and cut off the rest.
  7. Turn the pumpkin project over and stuff it with fiberfill until it’s as plump as you want it.
  8. Sew a running stitch along the top of the pumpkin and pull to gather, leaving a hole large enough to insert a cinnamon stick. Then tie a knot, weave in some of the excess yarn and cuts off the rest.
  9. Insert a cinnamon stick into the hole you left for it at the top of the pumpkin. You can hot glue it in place or leave it loose like I did so that I can replace the cinnamon stick if it looses its smell!
  10. Place in your house an enjoy!

Take a Look – Wholesome Game Direct!

Change into some comfortable clothes, get a yummy drink, drape a soft blanket over your lap and maybe even cuddle with a pet; the Wholesome Game Direct aired this Saturday, June 10th!

Here is the full presentation:

I am pretty excited to play most of the games presented, but if I had to choose my top five (in no particular order):

What games piqued your interest? I’d love to know!