craft – Page 6 – Whole Heartily

DIY Autumn Leaves Sensory Bottle

DIY Autumn Leaves Sensory Bottle I love Autumn, it has to be my favorite season of the year!

After creating a Summer-themed ocean wave bottle, I felt inspired to create a sensory bottle for each season and I immediately thought of swirling multi-hued Autumn leaves! Part of the fun in raising Zoey is making things that teach and fascinate her. And, if I’m being completely honest, I find sensory bottles fascinating too, so let’s make one!

DIY Autumn Leaves Sensory Bottle

SUPPLIES

16 ounce clear, plastic bottle
6 ounces of hot water
Clear glue
Slender whisk
Glycerin
Leaf-shaped glitter
Regular glitter (optional)
More hot water
Glue for the lid

DIY Autumn Leaves Sensory Bottle

INSTRUCTIONS

Pour the 6 ounces of hot (as hot as your tap will run) water into your bottle.
Add 2.5 to 3 ounces (or more) of glue to the hot water in your bottle. The more glue you add, the slower your leaves will swirl and fall.
Whisk the glue in the hot water until well incorporated. You can also replace the lid of the bottle and shake, however this created a lot of foam bubbles for me. They will go away, but it will slow down your progress.
Measure 1 to 2 tablespoons of Glycerin and whisk or replace the lid and shake again.
Add your glitter. I used several different hues of leaf shaped glitter and a few pinches of regular gold glitter.
Pour more hot water into the bottle. Stop before reaching the top, replace the lid and turn the bottle over several times to check how everything moves. At this point you can add more glitter, more glue to make it fall slower, and/or more glycerin to smooth everything out.
After you’re satisfied with the flow of the bottle’s contents, remove the lid again and fill the bottle all the way to the top with the hot water.
If your child is older and you worry about him/her undoing the lid, you can coat the inside of the lid with glue, then screw it back onto the bottle. This will secure the lid and make it harder for little ones to unscrew the lid and create a leak or spill the bottle’s contents.

DIY Autumn Leaves Sensory Bottle

DIY Peasant Belle Peg Doll

DIY Peasant Belle Peg Doll Part of the fun in raising Zoey is making things that delight her; I want to create lasting, meaningful toys for her that are made with love and will be loved! Wooden toys are classic and beautiful, when created and treated right, they can last a lifetime; so let’s make some!

It’s no secret that Cameron and I love Disney. Zoey’s middle name was inspired by one of my favorite Disney princesses, Belle, and that Belle in her name has also led to another Disney nickname, Tinker Bell. I cannot wait to create a whole set of peg dolls for her, but these two characters hold the most significance until she begins watching the classics on her own.

We’ve created a Tinker Bell Peg Doll, check her out!

This week I’ll be sharing the steps I took to create a Belle peg doll in her blue peasant dress for Zoey.

DIY Peasant Belle Peg Doll

SUPPLIES

Blank peg doll (I used a “small angel” or “girl” shape/size)
Small, flat & fine tip paint brushes
Paint palette (or a tray for your paint)
Blue non-toxic acrylic paint
White non-toxic acrylic paint
Light blue non-toxic acrylic paint
Brown non-toxic acrylic paint
Dark brown non-toxic acrylic paint
Black non-toxic acrylic paint
Non-toxic varnish (I used Duraclear Ultra Matte Varnish)

INSTRUCTIONS

DIY Peasant Belle Peg Doll

With a pencil, lightly sketch Belle onto your blank peg doll. Belle wears a dress over a white blouse, I gave her sleeves so more of the blouse can be seen.
Begin painting your peg doll with the base layers first. I started with the blue of her dress and hair bow, the white of her blouse and apron, and the brown of her hair. Allow this paint to dry before moving on to avoid smudging, then apply a few more layers of each until you’re happy with the colors and textures.
Paint the very bottom and edges of the peg doll black to signify her shoes.
After the base layers have dried, paint a border of light blue on the edges of her apron, shirt and hair bow. If you don’t have a lighter shade of blue, you can create some by adding a small amount of white paint to the original blue and blending.
Paint dark brown accents on and around the hair, don’t forget her ponytail in the back!
Taking something small and round (I used the opposite end of one of my smaller paint brushes) dip it in black paint and dot the two eyes. Using the finest tipped paintbrush you can find, give her an eyelash or two on each eye.
Once the eye paint has dried, add a highlight dot to each eye with a fine tipped paintbrush and white paint.
Using the same method as the eyes, dip the opposite end of a slightly larger paintbrush into light pink paint and dot the blush under each eye.
With a little white paint, give her a few sparkles of pixie dust on the hem of her dress or wherever else you feel it will look right!
Allow for all paint to completely dry, then apply a varnish and allow it to dry. You can apply as many coats as you want for the finish you want, just allow them to dry in between applications and before handing her over to your child.
Voilà! Belle is done and ready to be played with! Enjoy!

DIY Peasant Belle Peg Doll

DIY Tinker Bell Peg Doll

DIY Tinker Bell Peg Doll Part of the fun in raising Zoey is making things that delight her; I want to create lasting, meaningful toys for her that are made with love and will be loved! Wooden toys are classic and beautiful, when created and treated right, they can last a lifetime; so let’s make some!

We’ve created a Peasant Belle Peg Doll, check her out!

This week I’ll be sharing the steps I took to create a Tinker Bell peg doll for Zoey.

DIY Tinker Bell Peg Doll

SUPPLIES

Blank peg doll (I used a “small angel” or “girl” shape/size)
Small, flat & fine tip paint brushes
Paint palette (or a tray for your paint)
Green non-toxic acrylic paint
Yellow non-toxic acrylic paint
Light brown non-toxic acrylic paint
Light blue non-toxic acrylic paint
Light pink non-toxic acrylic paint
White non-toxic acrylic paint
Black non-toxic acrylic paint
Non-toxic varnish (I used Duraclear Ultra Matte Varnish)

INSTRUCTIONS

With a pencil, lightly sketch Tinker Bell onto your blank peg doll.
Begin painting your peg doll with the base layers first. I started with the green of her dress, the white of her wings and the yellow of her hair. Allow this paint to dry before moving on to avoid smudging, then apply a few more layers of each until you’re happy with the colors and textures.
Paint the very bottom and edges of the peg doll green to signify her slippers.
After the base layers have dried, paint a border of darker green on the edges of her dress. If you don’t have a darker shade of green, you can create some by adding a small amount of black paint to the original green and blending.
Paint an accent of lighter green on the inner layer of the dark green border of her dress. If you don’t have a lighter shade of green, you can create some by adding a small amount of white paint to the original green and blending.
The wings can stay matte white, or you can add a pearly white finish to give them a sheen. Once the wings have dried, border and accent them with light blue paint.
Paint light brown accents on and around the hair.
Once the hair has dried, paint a small light blue ribbon around Tinker Bell’s bun.
Taking something small and round (I used the opposite end of one of my smaller paint brushes) dip it in black paint and dot the two eyes. Using the finest tipped paintbrush you can find, give her an eyelash or two on each eye.
Once the eye paint has dried, add a highlight dot to each eye with a fine tipped paintbrush and white paint.
Using the same method as the eyes, dip the opposite end of a slightly larger paintbrush into light pink paint and dot the blush under each eye.
With a little white paint, give her a few sparkles of pixie dust on the hem of her dress or wherever else you feel it will look right!
Allow for all paint to completely dry, then apply a varnish and allow it to dry. You can apply as many coats as you want for the finish you want, just allow them to dry in between applications and before handing her over to your child.
Voilà! Tinker Bell is done and ready to be played with! Enjoy!

DIY Tinker Bell Peg Doll

DIY Edible “Sand” for Sensory Playtime

DIY Edible Sand for Sensory Play It’s the middle of Summer and I would love to take Zoey to the beach for the first time, but just about everything she picks up is quickly introduced to her mouth! I understand she’s figuring things out (and more power to her), but I’m not super enthusiastic about her ingesting beach sand. So, until she gets a little less eager to put everything in her mouth, why not bring a little beach experience to her?

Part of the fun in raising Zoey is making things that teach and fascinate her. We can make edible “sand” that’s fun to play in and safe to eat out of graham crackers and oatmeal; let’s make it!

Check back next week for the homemade teething cookies I made with the remaining edible “sand”.

DIY Edible Sand for Sensory Play

SUPPLIES

1 box of graham crackers.
2 cups of oatmeal (I used whole grain old-fashioned oats)
A food processor
A mixing bowl
A mixing spoon
A container for playing in the “sand” (I used a heavy casserole dish)
Beach or ocean themed toys (optional)

INSTRUCTIONS

Open the graham crackers and blend them in the food processor until they are a fine sand-like texture.
Remove the graham crackers from the food processor and pour them into a mixing bowl.
Measure the oatmeal into the food processor and blend it until it is also a fine sand-like texture.
Remove the oatmeal from the food processor and add it to the mixing bowl with the graham crackers.
Using a mixing spoon, stir the graham crackers and oatmeal together until well combined.
Pour the edible “sand” into the container you’ve chosen for your baby to play in. I used a heavy casserole dish since Zoey’s not strong enough to flip it yet. You can always double or triple the graham cracker and oatmeal ratio if you want to fill a larger container.
Arrange beach and/or ocean themed toys in the sand for your little one to play with (optional).
Introduce the edible “sand” to your baby and enjoy!

DIY Ocean Wave Sensory Bottle

DIY Ocean Wave Sensory Bottle With Summer solstice right around the corner, I was thinking about the beach and got inspired to make an ocean wave sensory bottle (not to mention I had all the ingredients already on hand)! Part of the fun in raising Zoey is making things that teach and fascinate her. And, if I’m being completely honest, I find sensory bottles fascinating too, so let’s make one!

DIY Ocean Wave Sensory Bottle

SUPPLIES

16 ounce clear, plastic bottle
Funnel
8 ounces of water
Blue and green food coloring.
8 ounces of baby oil
Glue

DIY Ocean Wave Sensory Bottle

INSTRUCTIONS

Place the funnel in the mouth of your bottle and use it to fill the bottle with 8 ounces of water.
Remove the funnel and add several drops of blue and green food coloring until you reach your desired shade of ocean aqua. I used 8 drops of blue and 2 drops of green, as you can see that led to a very deep shade of blue green.
Screw the lid back onto the bottle and shake the water until the food coloring is well incorporated, then remove the lid and replace the funnel.
Add up to 8 ounces of baby oil.
If your child is older and you worry about him/her undoing the lid, you can coat the inside of the lid with glue, then screw it back onto the bottle. This will secure the lid and make it harder for little ones to unscrew the lid and create a leak or spill the bottle’s contents. If you’re still concerned they may be able to get the lid off, please use cooking oil instead of baby oil.

DIY Chalkboard – Made from a Vintage Wall Frame

DIY upcycled chalkboard made from vintage wall frame. Years ago, I purchased an old empty frame from a Goodwill store. I didn’t know exactly what I wanted to use it for, I just knew that I loved the decals on each corner and wanted to fix it up and give it a home. After years of procrastinating while the frame sat around and gathered dust, I finally decided to paint it and create a chalkboard.

DIY upcycled chalkboard made from vintage wall frame. First, remove and sand one side of the mounting board to smooth it out. Once it’s as smooth as you prefer clean it off and prime it, then begin layering coats of chalkboard paint until you’ve reached your desired chalkboard depth and texture.

Scuff the frame with sanding paper all over to allow for the paint to adhere better. Clean the frame and prime it, then begin layering coats of white paint until you’ve reached your desired depth of color (or lack of color in my case since I used white); I used acrylic paint.

DIY upcycled chalkboard made from vintage wall frame. Once both pieces are dry, you can reassemble the frame. Before writing or drawing on the chalkboard, you’ll need to prime it by coating it with chalk.

DIY upcycled chalkboard made from vintage wall frame. As you can see I just wrote the first thing that came to my mind here, but I intend on leaving this frame up as decor year round and changing it for different events, seasons or holidays!

DIY upcycled chalkboard made from vintage wall frame.